| Description |
List Price |
Special Price |
| DEMO Unit Special VUL-1216MS Multi-Station Rectangular Vacuum Chuck. The overall dimension of the vacuum chuck are 11-5/8" wide (approximately 17" wide with hard piping) by 16" long on 1" centers with two (2) vacuum inlets and two (2) dump valves. Each vacuum inlet has two (2) vacuum ports (for a total of four vacuum ports). The unit is blank (no pre-existing mounting options) for customer flexibility. Additional mounting options, such as T-slot grooves, hold down bolt holes, and/or a steel back plate, are available at an additional cost. |
$1,390 each |
$1,040 one only |
| DEMO Unit Special VUL-928MS Multi-Station Rectangular Vacuum Chuck. The overall dimension of the vacuum chuck are 9-1/2" wide (approximately 16" wide with hard piping) by 28" long on 1" centers with two (2) vacuum inlets and two (2) dump valves. Each vacuum inlet has two (2) vacuum ports (for a total of four vacuum ports). The unit is blank (no pre-existing mounting options) for customer flexibility. Additional mounting options, such as T-slot grooves, hold down bolt holes, and/or a steel back plate, are available at an additional cost. |
$1,540 each |
$1,150 one only |
| DEMO Unit Special VUL-3060MS Multi-Station Rectangular Vacuum Chuck. The overall dimension of the vacuum chuck are 30" wide (approximately 36" wide with hard piping) by 60" long on 1" centers with four (4) vacuum inlets and four (4) dump valves. Each vacuum inlet has four (4) vacuum ports (for a total of sixteen vacuum ports). The unit has eight (8) hold down bolt holes. Additional mounting options, such as T-slot grooves, and/or a steel back plate, are available at an additional cost. |
$5,790 each |
$4,340 one only |
| Demo SMDP-4.5-L Medium Duty Stationary Lubricated Vacuum System.
The unit has a 1/3 horse power motor and operates on 115VAC, single phase, 60Hz.
The system is designed to cycle on and off with an adjustable vacuum switch and displaces 4.5 CFM.
The units comes complete with a twelve (12) gallon reservoir tank for fast pull down on workpieces.
The system is recommended for vacuum chucks up to 288 square inches.
The unit has a shipping weight of approximately 130 pounds. |
$1,935 each |
$1,785 one only |
| Demo SMDP-10-L Medium Duty Stationary Lubricated Vacuum System.
The unit has a 3/4 horse power motor and operates on 115VAC, single phase, 60Hz.
The system is designed to cycle on and off with an adjustable vacuum switch and displaces 10.0 CFM.
The units comes complete with a twenty (20) gallon reservoir tank for fast pull down on workpieces.
The system is recommended for vacuum chucks up to 600 square inches.
The unit has a shipping weight of approximately 185 pounds. |
$2,375 each |
$2,190 one only |
| Demo SHDP-7 Heavy Duty Stationary Vacuum System.
The unit has a direct driven, 3/4 horse power motor and operates on 115 VAC, single phase, 60Hz.
The system is designed to run continuously, displace 7 CFM, and operate at 29+ inches of mercury.
In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating
oil from the exhaust. The unit comes complete with a manual electric motor starter (115 VAC), an anti-suck
back valve, and a twenty (20) gallon horizontal reservoir tank for fast pull down on workpieces.
The system weighs approximately 165 pounds and is recommended for vacuum chucks up to 800 square inches. |
$3,050 each |
$2,850 one only |
