Rotary Slot

1/2" Center Series

VUL-6CR

Overall diameter 6” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2" centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

VUL-8RS

Overall diameter 8” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2" centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

Please reload

1" Center Series

VUL-10RS

Overall diameter 10” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

VUL-12RS

Overall diameter 12” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

VUL-16RS

Overall diameter 16” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

Please reload

2" Center Series

VUL-20RS

Overall diameter 20” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

VUL-24RS

Overall diameter 24” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with two drilled port. The standard mounting is blank.

VUL-36RS

Overall diameter 36” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with two drilled port. The standard mounting is blank.

VUL-42RS

Overall diameter 42” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with four drilled port. The standard mounting is blank.

VUL-48RS

Overall diameter 48” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with four drilled port. The standard mounting is blank.

VUL-60RS

Overall diameter 60” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with four drilled port. The standard mounting is blank.

Please reload

All vacuum chucks come standard without an adapter plate, locating pins or supporting pins. The customer will be responsible for installation and “grinding-in” of the vacuum chuck surface.  Most products are custom-made and take from one week to four weeks.

      Vac-U-Lok   

    815-758-1822

  • Facebook Social Icon
  • Twitter Social Icon

      Vac-U-Lok   

   864-968-9494

© 2019 Vac-U-Lok Workholding Technologies