top of page

Single Station Rotary

1" Center Series

VUL-6CR

Overall diameter 6” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1" centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

VUL-8CR

Overall diameter 8” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1" centers. The chuck will have one  vacuum inlet with one drilled port. The standard mounting is blank.

VUL-10CR

Overall diameter 10” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

VUL-12CR

Overall diameter 12” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

Please reload

2" Center Series

VUL-16CR

Overall diameter 16” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

VUL-20CR

Overall diameter 20” round by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with one drilled port. The standard mounting is blank.

VUL-24CR

Overall diameter 24” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with two drilled port. The standard mounting is blank.

Please reload

4" Center Series

VUL-36CR

Overall diameter 24” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with two drilled port. The standard mounting is blank.

VUL-42CR

Overall diameter 24” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with two drilled port. The standard mounting is blank.

VUL-48CR

Overall diameter 24” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with two drilled port. The standard mounting is blank.

VUL-60CR

Overall diameter 24” round by 1.5” thick. The groove pattern will be 1/8” wide by 1/4” deep on 2” centers. The chuck will have one vacuum inlet with two drilled port. The standard mounting is blank.

Please reload

*All vacuum chucks come standard without an adapter plate, locating pins or supporting pins. The customer will be responsible for installation and “grinding-in” of the vacuum chuck surface.  Most products are custom-made and take from one week to four weeks.

bottom of page