Single Line Economical 

with Buzzer & Light

VSS-E-BL

The unit comes complete with an adjustable low vacuum safety sensor fastened to a NEMA 12/13 mountable enclosure and a 1/4" hose barb with approximately fifteen (15) feet of vacuum hose to tie into the vacuum line (near the vacuum chuck). The unit operates on 115V, single phase and has an alarm buzzer and red light to indicate a loss in vacuum pressure.  In addition, the unit has an On/Off Switch to by-pass the alarm when the vacuum workholding system is not in use on your machine.  This unit does not have an E-Stop tie-in function to shutdown the machine tool.  Recommended for a single vacuum line only.

VSS-E-BL-E-Stop

 

The unit comes complete with an adjustable low vacuum safety sensor encased in a NEMA 12/13 mountable enclosure and a 1/4" hose barb with approximately fifteen (15) feet of vacuum hose to tie into the vacuum line (near the vacuum chuck). The unit operates on 115V, single phase and has an alarm buzzer and red light to indicate a loss in vacuum pressure. In addition, the unit has an On/Off Safety Switch to by-pass the alarm when the vacuum workholding system is not in use on your machine. The unit has a three (3) wire connection that interfaces to the customer's machine tool E-Stop. Turning the Safety Switch off also allows the unit to run with no vacuum. Recommended for a single vacuum line only.

Please reload

      Vac-U-Lok   

    815-758-1822

  • Facebook Social Icon
  • Twitter Social Icon

      Vac-U-Lok   

   864-968-9494

© 2019 Vac-U-Lok Workholding Technologies