top of page

Vacuum Systems

SHDP-7 (115 V)

Heavy Duty Stationary Vacuum System.  The unit has a direct driven, 3/4 horse power motor and operates on 115 VAC, single phase, 60Hz.  The system is designed to run continuously, displace 7 CFM, and operate at 29+ inches of mercury.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes complete with a manual electric motor starter (115 VAC), and a twenty (20) gallon horizontal reservoir tank for fast pull down on workpieces.  The system weighs approximately 165 pounds.

SHDP-7

Heavy Duty Stationary Vacuum System.  The unit has a direct driven, 3/4 horse power motor and operates on 208/230 or 460 VAC, 3 phase, 60Hz.  The system is designed to run continuously, displace 7 CFM, and operate at 29+ inches of mercury.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes complete with a manual electric motor starter (208/230 or 460 VAC), anti-suck back valve, and a twenty (20) gallon horizontal reservoir tank for fast pull down on workpieces.  The system weighs approximately 165 pounds.

SHDP-20

Heavy Duty Stationary Vacuum System.  The unit has a direct driven, 1-1/2 horse power motor and operates on 208/230 or 460 VAC, 3 phase, 60Hz.  The system is designed to run continuously, displace 20 CFM, and operate at 29+ inches of mercury.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes complete with a manual electric motor starter (208/230 or 460 VAC), a spin-on oil filter, and a thirty (30) gallon horizontal reservoir tank for fast pull down on workpieces.  The system weighs approximately 315 pounds.

SHDP-45

Heavy Duty Stationary Vacuum System.  The unit has a direct driven, 3 horse power motor and operates on 208/230 or 460 VAC, 3 phase, 60Hz.  The system is designed to run continuously, displace 45 CFM, and operate at 29+ inches of mercury.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes complete with a manual electric motor starter (208/230 or 460 VAC), a spin-on oil filter, and a sixty (60) gallon horizontal reservoir tank for fast pull down on workpieces.  The system weighs approximately 460 pounds.

SHDP-70

Heavy Duty Stationary Vacuum System.  The unit has a direct driven, 5 horse power motor and operates on 230 or 460 VAC, 3 phase, 60Hz.  The system is designed to run continuously, displace 70 CFM, and operate at 29+ inches of mercury.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes complete with a manual electric motor starter (230 VAC or 440 VAC), a spin-on oil filter, and a eighty (80) gallon horizontal reservoir tank for fast pull down on workpieces.  The system weighs approximately 580 pounds.

SHDP-117

Heavy Duty Stationary Vacuum System.  The unit has a direct driven, 5 horse power motor and operates on 208/230 or 460 VAC, 3 phase, 60Hz.  The system is designed to run continuously, displace 117 CFM, and operate at 29+ inches of mercury.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes complete with a manual electric motor starter (208/230 or 460 VAC), a spin-on oil filter, and a hundred and twenty (120) gallon horizontal reservoir tank for fast pull down on workpieces.  The system weighs approximately 720 pounds.

SHDP-180-1-0

Heavy Duty 180 CFM Vacuum Pump, Motor, Motor Starter, and Intake Filter ONLY.  The unit comes with a 10 horse power, 230 or 460 VAC, 3 phase, 60Hz and a manual electric motor starter (230 or 460 VAC).  The pump is designed to run continuously, displace 180 CFM, and operate at 29+ inches of mercury at the pump.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit also has a built-in anti-suck valve and intake filter.  The unit weights approximately 475 pounds.

SHDP-180-200g

Heavy Duty Stationary Vacuum System.  The unit has a direct driven, 10 horse power motor and operates on 230 or 460 VAC, 3 phase, 60Hz.  The system is designed to run continuously, displace 180 CFM, and operate at 29+ inches of mercury.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes complete with a manual electric motor starter (230 or 460 VAC), a spin-on oil filter, and a two hundred (200) gallon horizontal reservoir tank for fast pull down on workpieces.

SHDP-180-240g

Heavy Duty Stationary Vacuum System.  The unit has a direct driven, 10 horse power motor and operates on 230 or 460 VAC, 3 phase, 60Hz.  The system is designed to run continuously, displace 180 CFM, and operate at 29+ inches of mercury.  In addition, the pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes complete with a manual electric motor starter (230 or 460 VAC), a spin-on oil filter, and a two hundred forty (240) gallon horizontal reservoir tank for fast pull down on workpieces.

SHDP-234-1-0-2P

Heavy Duty Vacuum Pumps, Motors, Motor Starters, and Intake Filters ONLY.  The unit comes complete with two (2) direct driven, 7-1/2 horse power motors and operates on 230 or 460 VAC, 3 phase, 60hz motor and a manual electric motor starter (230 or 460 VAC).  The system is designed to run continuously, displace 234 CFM, and operate at 29+ inches of mercury.  In addition, each pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes with a manual electric motor starter (230 or 460 VAC), a spin-on filters, and an intake filters.  The system weighs approximately 990 pounds.

SHDP-360-1-0-2P

Heavy Duty Vacuum Pumps, Motors, Motor Starters, and Intake Filters ONLY.  The unit comes complete with two (2) direct driven, 10 horse power motors and operates on 230 or 460 VAC, 3 phase, 60hz motor and a manual electric motor starter (230 or 460 VAC).  The system is designed to run continuously, displace 360 CFM, and operate at 29+ inches of mercury.  In addition, each pump has a circulating lubrication system and removes 99.9 percent of the lubricating oil from the exhaust.  The unit comes with a manual electric motor starter (230 or 460 VAC), a spin-on filters, and an intake filters.  The system weighs approximately 1,100 pounds.

Please reload

bottom of page